Thin Sheet metal Steel Coil Automatic Slitting production line 3x1600mm
Performance and features:
This series of Steel Coil Slitting production line is applicable to coils of various specifications.
It is used for slitting the coil into required width for the use of punch line through the procedure of uncoiling. pre-leveling. cropping, slitting and recoiling.
It has advantages such as proper layout, easy operation, highly automated and high production efficiency.
This line is adaptable to process cold-rolled and galvanized coils, silicon steel coils, stainless coils, prepainted coils, aluminum coils, and all sorts of plated and coated coils, and it widely applies to many industries like automobiles. containers, household appliances, food packing, construction materials, etc
This line consists of coilcar, uncoiler, slitter, scrap winder, scrap shear tension pad and coil recoiler, etc. Loop bridge, pinch and deviation corrector are equipped between each machine.
This automatic coil processing line is a integration of mechanical, electrical, hydraulic and pneumatic technology.
The smaller metal strips are recoiled at the end of the slitting machine by which these smaller strips are used necessarily for the next process usage in the professional field of making transformers, motors making industry, tube/pipe welding mill industry, Cold roll forming industry, ceiling drywall industry and other high-precison equipment making and metal strips making industries.
According to the material slitting thickness there are thin plate or board slitting machine,media-thickness plate or board slitting machine and thick plate or board slitting machine.
According to the metal materials there are copper strips slitting machine,stainless steel slitting machine,cold or hot rolled plate slitting machine,silicone steel slitting machine.
Technical Parameters:
| Material spec | (0.3-3.0)x(800-2000)mm |
| Material type | CR coil,galvanized coil,stainless coil,automobile plate |
| Performance | Yield strength 350MPa
Tensile strength 300MPa |
| Width | 800-2000mm |
| Thickness | 0.3-3.0mm |
| Coil weight | 20T |
| Line speed | 80-180m/min |
| No.of slits | 0.6mm--1.5mm 25strips
1mm--2mm 20 strips
2.1mm--3mm 10 strips |
| Min. slitting Width | 30mm |
| Operation height | 600-800mm |
| Occupied area | 24mX9m |
| Power | 300Kw |
Main components of the Line:
1. Coil saddle
2. Hydraulic coil car : loading capacity 20T
3. Hydraulic cantilever uncoiler
4. Coil feeding device
5. Pinch and pre-leveler
6. Shearing machine : 3x1600mm
7. Hydraulic loop bridge No.1
8. Guiding device
9. Slitter
10. Hydraulic scrap winding machine
11. Hydraulic loop bridge NO.2
12. Hydraulic damping separator and pressing device
13. Hydraulic recoiling machine
14. Hydraulic coil car : loading capacity 20T
15. Electrical control system
16. Hydraulic and pneumatic system (air source shall be provided by buyer)
